This is one option: http://tinytach.com/
Cheers, Aaron R. 1979 30-MK1 Annapolis, MD > On Oct 6, 2013, at 11:59 AM, "Al Serrato" <[email protected]> wrote: > > The tach on my 1981 34 (with a 3GM yanmar diesel) stopped working shortly > after I boat the boat last year. It was intermittent for a while and then > just stopped altogether. > > I used a voltmeter to check the four-prong plug and it looks like there is > juice coming through, so I don't think its a wiring issue. There is a black > ground, a red wire that shows 14 volts with the engine running and two other > wires that show a pulsing pattern on the voltmeter. > > I thought it would make sense to swap out the gauge with a new one, but > finding a replacement part seems a bit trickier than I anticipated. There's > no part number on the gauge itself, just some hard to read letters on the > back (NS3 with three symbols below) and 1:1 12 v. The front of the gauge > reads Nippon Seiki N-2 and P= 97. > > Any suggestions on where to find a replacement gauge and/or other possible > solutions would be appreciated. > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
