Once you have the transmission in gear, put a box end wrench on each side of a coupling bolt am you should be able to free the nut. Using a small sledge hammer on the wrench will help break the nuts free.
Rich > On Oct 26, 2013, at 18:09, Eric Frank <[email protected]> wrote: > > I am changing the bellows on a PYI dripless "stuffing box" and need to keep > the prop shaft from turning in order to loosen the bolts connecting the shaft > to the transmission. Putting the transmission in gear makes it harder to > turn, but it is still not enough to keep it from turning so I can loosen the > bolts. Obviously not specific to CC boats, but probably many people on this > list know how to do this without damaging things. > > Eric Frank > Cat's Paw > C&C 35 Mk II > Mattapoisett, MA > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
