Here's a quick way to measure the pitch: http://propellerhub.com/simple-pitch-measuring.html
On 26 November 2013 08:07, Joel Aronson <[email protected]> wrote: > Joanne, > > Was there any anode (zinc) left? On the Chesapeake I go through several > in a season. You might consider putting on 2 or having someone dive and > check during the season. > > Joel > 5/3 > Annapolis > > > On Tue, Nov 26, 2013 at 11:05 AM, Rich Knowles <[email protected]> wrote: > >> Welcome Joanne! >> >> What is the engine in your boat and shaft diameter? >> >> Rich >> >> >> >> >> >> >> >> On Nov 26, 2013, at 11:53 AM, [email protected] wrote: >> >> Hello all >> >> I have been watching the list for a while but never contributed until >> now. Couple years ago we bought a 1980 C&C 30 MKI from the original owner. >> wonderful wonderful boat! This was our first boat and things have been a >> bit daunting at times- but I cant tell you how much the list helps. >> >> When we pulled her this year we had some serious prop corrosion issues. >> We are still trying to assess the cause (anode was replaced last spring >> but perhaps I didn't get good contact)but regardless we will need to >> replace the prop. It is a 15 inch radius 2 blade fixed but the erosion is >> such that I cannot read the pitch- how do I figure this out? >> >> Any suggestions as to suppliers as well?- we will likely stick with the 2 >> blade fixed. has any one had experience with the urethane perfect pitch >> props? >> >> Thanks in advance >> >> Joanne Dowd >> SV Islay >> Hamilton ON >> >> Sent from Windows Mail >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] >> >> > > > -- > Joel > 301 541 8551 > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > > -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
