Eric:
I keep a small container of 50%-50% ATF and acetone on hand......it
mixes perfectly and does not separate like yours did.....not sure what
happened to yours!
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2013/11/29 10:32 AM, Eric Frank wrote:
Tim,
Someone on this list suggested that when I was having trouble with the
rusty bolts on the coupler between Cat's Paw's transmission and prop
shaft. It worked very well. But here's a question. The ATF did not
mix well with the acetone. I could shake it up and make a suspension,
like oil and vinegar in salad dressing, but then it separated out over
the next couple of minutes. So I poured on the suspension. Does this
mixture stay dissolved for others on the list? Is it important to use
a particular brand of ATF (I went cheap)?
Eric Frank
On Nov 29, 2013, at 9:01 AM, [email protected]
<mailto:[email protected]> wrote:
From: "Tim Sippel" <[email protected]
<mailto:[email protected]>>
To: <[email protected] <mailto:[email protected]>>
Subject: Re: Stus-List Marvel Mystery Oil
Message-ID:
<[email protected]
<mailto:[email protected]>>
Content-Type: text/plain; charset="utf-8"
I think I read Automatic transmission fluid mixed with Acetone ..
Ahh hear it is http://grassrootsmotorsports.com/tech-tips/55/
Tim >
Toronto <http://www.timeanddate.com/worldclock/city.html?n=250>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
