The HIN- is ZCC40129M81H, so I assume that means #129, the present prop is a 2 blade fixed, I also have a question for you on main sail dimensions, is there only one P=46.5 or is it possible to be longer, I am considering a new main as it looks like the main is an original. I am also led to believe (and I checked) that the draft is 8.25' instead of 7'-more confusion, (I asked Bob about it at Block Island and he did not know about that deep an option.
Thanks, George From: CnC-List [mailto:[email protected]] On Behalf Of Andrew Burton Sent: Tuesday, January 14, 2014 4:12 PM To: [email protected] Subject: Re: Stus-List folding prop for C&C 40 mine is 1 1/8" Your engine should go to full rated RPM in gear. If it doesn't, then your prop may be overpitched or your tach may not be right or you have a problem with the engine. In my 1981 I have a Yanmar 3QM not the 3HM. What hull number is your boat? Mine is 143. Andy C&C 40 Peregrine On Tue, Jan 14, 2014 at 4:03 PM, George Cone <[email protected]> wrote: I am considering adding a folding prop for the boat and wanted to know if anyone had information on the recommended size of the propeller and what the size of the shaft might be. The boat is a 1981 with the 27 hp - yanmar 3HM- the engine is rated for 3200 rpm, but normally will only go to 2600rpm. Thanks George A Cone [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
