Mark 1 Unit 0 info here: http://forums.sailinganarchy.com/index.php?showtopic=61882 Post 8.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 18 January 2014 14:45, Peter Fell <[email protected]> wrote: > No, aluminum foil. The Mark 1 was the one with the dreaded rollpins for > the foils but only on the Unit 1 and above - the Unit 0 had screws. > > Thanks for taking a look Andy! > > > *From:* Andrew Burton <[email protected]> > *Sent:* Saturday, January 18, 2014 2:35 PM > *To:* Peter Fell <[email protected]> ; [email protected] > *Subject:* Re: Stus-List Harken Furler Mark 1 Unit 0 > > Is that the one with the plastic foil? If so, I think you,re SOL. I had > to completely replace mine on the J/80 with a whole new unit. I'll check my > J/80 stuff tomorrow. > > Andy > C&C 40 > Peregrine > > Andrew Burton > 61 W Narragansett > Newport, RI > USA 02840 > > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > > On Jan 18, 2014, at 16:25, "Peter Fell" <[email protected]> wrote: > > Just wondering if anyone local has a manual and parts list for a Mark 1 > Unit 0 furling unit that I could borrow and copy. > > Looking for parts too. Mine is missing a chunk out of the top of the > uppermost foil + the top cap. So I’m looking for a foil piece, cap, > possibly foil connector, etc. I’ve got a partial copy of the parts list – > looks like might have been a couple versions of this unit. > > Peter Fell > Sidney, BC > C&C 27 MkIII > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
