Doug, Did an Isotherm 2501 in my 35/3 last year. Hardest part was running a wire from the breaker to the lazarette for the compressor. I made a shelf fo the compressor out of plywood and epoxied it, only because I had some epoxy laying around. I drilled 2 holes in the back of the icebox for the copper lines and used a can of foam from Home Depot to fill them. Attached the evaporater with spacers and screws.
Joel 35/3 The Office On Wednesday, January 22, 2014, Doug Allardyce <[email protected]> wrote: > All, > I'm in the process of updating a 1985 C&C 35 MK 3. One of my projects is > installing a refrigeration unit. As I'm in the planning phase, I'm looking > to hear from anyone who has already done an installation. I would be > interested to know what unit was selected, and how it was installed. If > anyone has pictures that would be great > > Doug Allardyce > 1985 C&C 35 MK III "Bullet" > Detroit > ~~~~~~~~_/)~~~_/) ~~~~~~~~ > > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
