Adding insulation to the top of our icebox made a huge difference (and is simple and inexpensive). Like Jake, we used to get condensation on the top of the counter there.
Tim > On Jan 24, 2014, at 5:23 PM, "Jake Brodersen" <[email protected]> wrote: > > Dwight, > > The foam I added to the top of the ice box helps prevent condensation on the > counter. I still get some over the lid, which I didn’t change. I would > rather drill holes from outside the box, than the inside. They’re easily > hidden under the sink, but a little more obvious by the stove. I’m not sure > how much of a cavity it there to fill anyway. Spray foam can exert a lot of > pressure, so be careful. I have seen it buckle walls in houses. I have a > small round access plate below the stove on the left side of the ice box. I > can reach the drain hose. I may be able to stick my inspection camera > (boroscope) in there to check it out. > > Jake > > From: CnC-List [mailto:[email protected]] On Behalf Of dwight > Sent: Thursday, January 23, 2014 8:09 PM > To: [email protected] > Subject: Re: Stus-List Installing Refrigeration on a C&C 35 Mk3 > > Jake > > I have an almost identical setup for the Adler Barbour on Alianna. In your > case, did the added Styrofoam insulation make a significant difference? Have > you added any insulation around the sides or on the bottom of the icebox? > > I am considering adding polyurethane spray foam insulation…I wonder if > drilling holes from inside out through the ice box to insert the nozzle would > be a reasonable way to do that…would the foam trap water that could cause > problems…how many cans would I need etc. ? > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
