Thanks Bill
Interesting it uses screws ... but if the torque tube is tapered, not
straight, then it is a Mark 2.
I think there was some overlap in the models ... the code stamped on mine
indicates it was built in early 1993.
-----Original Message-----
From: Bill Connon
Sent: Monday, February 10, 2014 12:37 PM
To: Peter Fell ; [email protected]
Subject: Re: Stus-List Harken Furler Mark 1 Unit 0
Peter Fell wrote:
Success .... I think!
After a bit of a search I’ve found a new section of foil here locally in
the ‘parts bin’ of a rigging shop (it’s actually new ... still in the
plastic wrap). The rigger has a 2nd piece as well that has been cut down.
Now he says he can’t be 100% sure it is a Mark 1 foil ... dimensions are
correct and it is a screw (not rollpin) unit (the Mark 1 Unit 0 were the
only Unit 1’s that used screws rather than rollpins) but if it is a Mark 2
foil, then the shape inside would be slightly different ... this fellow
says the differences in the early Marks is small enough that the connector
can be modified to suit without too much difficulty. .... I’ll find out
tomorrow exactly what it might cost me for the part and also what the
rigging shop will charge me to replace the forestay and fix-up the foil /
install a halyard restrainer. This fellow says typically they make-up a
new top-cap out of some plastic and he feels the old Mark 1 Unit 0 on my
boat still has some good life left in it – in fact it seems this guy
prefers the older Harkens to the newer ones.
Another rigger has quoted me $950 to repair the existing furler (not
including replacement parts), replace the forestay and add a halyard
restrainer (all with the mast up) .... and about $2500 to replace with a
new Mark IV Unit 0. (I can probably cut about $250 off that by ordering
the furler myself).
I’m quite leaning towards keeping the old unit. Mainly a cost thing at
this time – I’ve got enough other projects needing doing! ... if I can
keep the old one going for a couple more years I’ve been told the rest of
my standing rigging probably only has a couple year’s left in it .... so
then would be the opportunity to have the mast down and reassess the need
to redo the furling.
I’m still interested in finding a user manual for the old Mark 1 furling
unit, if anyone has one they can scan and email or send to me so I can
scan (and return).
Hopefully I can get this sorted out in the next couple of weeks, so that I
can get measured-up for my new genoa!
Any further words of wisdom?
Thanks,
Peter Fell
Sidney, BC
C&C 27 MkIII
Peter,
I have a scanned manual for a Harken Unit #1 from May 1991 that a fellow
gave me many years ago. My furler uses spring pins but the manual is for
a furler that uses screw connectors. I'll scan a couple of pages and
send them to you. If it's what you're looking for I'll mail you the
whole manual.
Bill
Caprice 1
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
