Anyone know if the Moeller tanks already come with a fuel gauge/sensor?
I can buy the kit with the electronic sensor and the return line - but
I'm happy to T the return line into the fuel feed or into the vent line
- but if I need to buy a fuel sensor anyway they I will likely buy the
kit (of course I'll also need an electronic gauge as well).
As for repair or replace - I guess it makes sense as I think about it -
a repair might buy me 2-10yrs - and failure could be a horrible mess.
A new plastic tank will last longer than I will and won't ever be a
point of concern.
Don't think I'll bother having a new custom made aluminum tank - one of
the pre-fab Moeller tanks will work with a bit of effort.
Next time I'm down at the boat I need to do some measurements - make
sure everything will fit and figure out how to fabricate a new base and
maybe fiberglass in some edge frames.
Mark
---------------------
Dr. Mark Bodnar
B.Sc., D.C., FCCOPR(C)
Bedford Chiropractic
---------------------
There is no cure for birth and death save to enjoy the interval.
- George Santayana
On 11/02/2014 4:44 PM, Rich Knowles wrote:
Thanks Wal. Other than the heating issue, which shouldn't be a problem as the
fuel gets mixed with incoming fuel from the tank, many fuel filter assemblies
have an in port for the return line.
Rich
On Feb 11, 2014, at 15:51, Wally Bryant <[email protected]> wrote:
Yes. It works fine.
<http://www.wbryant.com/StellaBoat/Projects/fuel/index.htm>
Rich wrote:
Has anyone tried teeing the fuel return line into the fuel feed line before the
filter? Just wondering??
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
