This time last year, I was considering painting my prop and SS shaft
with my bottom anti-fouling paint, Micron 66, to try to minimize mussel
growth.
Instead, I used a product I found at the Binnacle called "Aquagard
Transducer Paint"....a 6 ox. spay can.....label says it is good for
nylon and bronze transducers.....apply 2 coats.
On haulout last Fall, the prop and SS shaft was clean....a few barnacles
on the prop but no mussels......and there was no sign of the 'spray
paint' .....you could not tell that the prop and shaft were painted.
Will put 2 coats on again in a few weeks.....will clean the prop this
time with a solvent before applying. The can doesn't say what is in the
product except 4 solvents all ending in 'lene".... toulene, etc.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
