The pins that hold the blades are tapered stainless steel. Once you have removed the set screws, they should be easy to drive out, but make certain that you have all of the set screws removed. Mine had 2 short set screws in each hole, one on top of the other. Steve Thomas C&C27 MKIII Port Stanley, ON
> Date: Mon, 21 Apr 2014 15:35:16 -0300 > From: [email protected] > To: [email protected] > Subject: Stus-List How to remove blades of gori 2-blade prop > > I have a C&C 29-2 (1983) with a 2-blade Gori prop on it. I need to > remove the prop to replace the cutless bearing (without removing the > whole shaft). The blades have to be removed in order to get access to > the nut that would allow the prop to be removed. Does anyone know how to > do this or know where instructions are online? I have been able to loose > the three set-screws in the prop. > > --- Dave > S/V "Vela" > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
