I am using the flexible solar panel (PowerFilm 21 W, bought from Defender)
with the Morning star SunSaver Duo.

 

I cannot imagine anything simpler. I have the panel attached to the top of
the bimini and the cable attached to the controller. Controller attaches to
both batteries (where you can set them up as 50/50 or 90/10). You may need
an extra extension cable, depending how you route the wire to the
controller.

 

Last season, the solar kept my batteries charged all the time. I have no
shore power available.

 

If you have an Echo Charger or something like that, you don't need dual
battery controller, though.

 

Marek (in Ottawa)

 

From: CnC-List [mailto:[email protected]] On Behalf Of via
CnC-List
Sent: Monday, May 19, 2014 3:45 PM
To: [email protected]
Subject: Stus-List Solar power

 

Thanks to the list, I decided to stay with 2 AGM batteries (both Group 31)
and use one for starting. The complications of a dedicated
'starting/flooded' battery

were more trouble than necessary for me and how I use the boat. Further,
since my Zantrex Plus 40 charger wants all the batteries to be the same,
this was

a no-brainer.

 

However, as I will not charge the batteries with shore power when I am not
on board, I would like a very SIMPLE solution to

keeping these batteries topped off properly via a solar panel(s), that can
be easily disconnected and stored below when I am on the boat.

 

I am thinking of something like one or two flexible, light weight solar
panels, probably with some sort of controllers(s), to (probably) hook
directly

to the batteries while at the dock via some sort of simple
electrical/mechanical disconnect.

 

Suggestions on size/power output/hook-up/etc. from the list would be very
helpful. 

 

Charlie Nelson

Water Phantom

C&C 36 XL/kcb

 

 

 

 

 

 

[email protected]

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to