I also recommend the Whale. High capacity in a small package. Joel
On Tuesday, May 27, 2014, Frederick G Street via CnC-List < cnc-list@cnc-list.com> wrote: > Don’t forget to properly fuse the wire within seven inches of the > connection to +12VDC!!! This fuse should be sized to protect the wire > going to the pump switch. There should also be a fuse closer to the pump, > sized per the pump instructions; this is to protect the pump from > overheat/fire in case the shaft or impeller seizes. > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > On May 26, 2014, at 10:54 PM, Dennis C. via CnC-List < > cnc-list@cnc-list.com<javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> > wrote: > > Install a Rule Model 43 rocker switch in a convenient but out of the way > location. Wire the switch's positive to one of the battery cables on the > back of your battery switch (not the common, the one marked #1 or #2) and > the negative to ground (for the indicator light). By connecting to the #1 > or #2 connection, you're essentially connecting to one of the batteries. > As a rule, I don't like to connect directly to a battery inside the battery > box. > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
