Buy some paint (Interlux Brightside being the easiest to find and work with) and a Preval sprayer. Spray it on the area feathering it out on the edges. Do not tape it off. If you tape it or use a brush or roller you will leave a sharp edge which will be much more obvious than a feathered spray technique.
Hint: when matching color, err to the dark side. A lighter match will look like a repair; a darker match will look like a dirty spot. :) Dennis C. Touche' 35-1 #83 Mandeville, LA On Sun, Aug 17, 2014 at 11:30 AM, Sébastien Lemieux <[email protected]> wrote: > Hello everyone, > > I made a few repairs on my deck (changed rope clutches and filled some > holes left by a previous dodger) and I'm now left with several small > patches of sanded epoxy (I used thickened West epoxy and faired with 240 > grit). What would be your recommendation for the cosmetic finish? > > I can't seem to find any information on painting small surfaces, is it > just a matter of buying a small quantity of paint and attempting as best as > possible to feather in with the surrounding? Is there a type of paint that > works better than other for this type of work? I am not too concerned > about color matching as the current paint on my deck is quite faded and > already show a few shades depending on sun exposure. > > Thanks in advance for you help, > > -- > Sébastien Lemieux > Merlot X, C&C 30-2 1988 > Lake Champlain > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
