Adding my Garhauer story to the list. My C&C34+ came without bow chocks so my large double anchor painters had nothing to lead them to the cleats. Garhauer custom fabricated a set of stainless steel chocks with bolts welded to the bottom positioned to match the hole pattern of the toenail. I cut about 6” of the vertical of the toenail, removed two bolts on each side and mounted the new chocks onto the horizontal of the toenail with the bolts. Looks great, works great and was (to my mind) incredibly inexpensive (under $300). I am a very happy customer. Dave
On Nov 4, 2014, at 9:29 PM, wwadjo...@aol.com via CnC-List <cnc-list@cnc-list.com> wrote: > Another positive experience from Garhauer Marine. Sent my main sheet > traveller to them after lost some ball bearings, don't ask; they replaced all > in traveller, replaced all in the blocks too, no labor charge, just cost of > bearings and shipping. This is on a 1999 traveller car. > Very happy. > Bill Walker > C n C 36 > Pentwater, Mi > > Sent from my HTC > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > Aries 1990 C&C 34+ New London, CT
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
