Joel, That is exactly what I did on mine and it has worked very well. I didn’t use any hose on the lower end, just from the top of the pvc to the deck fitting. I would suggest that you keep the pvc section as short as possible to reduce the torque force on the elbow. James S/V Delaney 1976 C&C 38 Oriental, NC
From: Joel Aronson via CnC-List Sent: Thursday, December 04, 2014 9:44 AM To: [email protected] Subject: Stus-List Holding tank discharge hose All, My nasty winter project is to replace the hose from the holding tank to the deck fitting. Does it make sense to use a piece of PVC pipe from the bottom of the tank to a point above the tank so that the hose stays dry? -- Joel 301 541 8551 -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album Email address: [email protected] To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
