I've been fighting a leak for a while and with the persistent rain here in the PNW finally found the culprit. The aft deck brackets for the spinnaker pole hardware had not been tightened, worse yet I found a 3/8" ratchet drive with a 7/16" socket jammed up in the overhead rusted to one of the bolts; had to use WD40 to dislodge the tool. Seems someone was mid-stream on installing the bracket and became distracted. Good thing is I found the leak and hopefully have eliminated it. All along I thought it was the toe rail or Genoa rail which brings me to the question: If there's a Genoa rail, what does one use for the jib? I assume the same rail, is that a correct assumption?
Dan C&C 26' "Only Time"
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
