I cut a hole in the bottom of a suitably large cardboard box and set it down over the winch before starting disassembly. No parts jump overboard and if I spill grease it stays in the box, not on the deck.
Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC From: CnC-List [mailto:[email protected]] On Behalf Of Steve Thomas via CnC-List Sent: Saturday, February 21, 2015 9:58 AM To: mike amirault; [email protected] Subject: Re: Stus-List Barient winches. The only tricky bit is in not losing the pawls or springs. A cloth fastened between the toe rail and lifeline may help. ----- Original Message ----- From: mike amirault via CnC-List <mailto:[email protected]> To: [email protected] <mailto:[email protected]> Sent: Saturday, February 21, 2015 09:34 Subject: Stus-List Barient winches. Bradley, Try the Australian Yacht winch Company for barient parts. _____ _______________________________________________ Email address: [email protected] <mailto:[email protected]> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
