Would the non fail-safe GI's pass a survey (or insurance claim for electrical injury)?
Tim Mojito C&C 35-3 Branford, CT > On Apr 2, 2015, at 11:35 AM, Peter Fell via CnC-List <[email protected]> > wrote: > > And Yandina’s basic GI (not a Failsafe model) is $90 (Defender) or $100 > (Yandina direct) ... and it is rated as ignition protected. > > Optional capacitor available for another $90 (Yandina direct). > > > From: Jake Brodersen via CnC-List > Sent: Thursday, April 02, 2015 2:46 AM > To: 'Rick Brass' ; [email protected] > Subject: Re: Stus-List New Wiring Diagram Draft > > Rick, > > I built my own GI with instructions and parts from Yandina. It was a quick > and easy project, although the installation under the cockpit was a bit of a > challenge. > > Jake > > Jake Brodersen > “Midnight Mistress” > C&C 35 Mk-III > Hampton VA > > > > From: CnC-List [mailto:[email protected]] On Behalf Of Rick Brass > via CnC-List > Sent: Wednesday, April 01, 2015 9:17 PM > To: 'Josh Muckley'; [email protected] > Subject: Re: Stus-List New Wiring Diagram Draft > > Excellent summary, Josh. > > I recall the breakover voltage as .6 not .7, but the effect is the same. 1.2 > or 1.4 volts of breakover from two diodes in series will stop the galvanic > current. > > And for the frugal among us, and I think that covers most all sailors with > boats under about 50 feet, the price of a 1000 volt, 50 amp diode at Radio > Shack is about $2.99. Add a small project box, some wire, and a couple of > stud terminals, and you’ve got a homemade galvanic isolator for about $20-25. > > Rick Brass > Washington, NC > > > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
