XPEL or Clear Bra (3M). Sheets available on Amazon or from any car detailing shop. Installation is easy (on the car hood or the lights); on your panel it might be interesting, because the curves are quite complicated, aren’t they? Best to apply in hot weather (30 C). The film stretches quite a bit, if needed. the best part is that if you follow instructions (wet (mist) the surface before installing), you can re-adjust the film; nothing is really final.
Marek From: Andrew Burton via CnC-List Sent: Tuesday, May 26, 2015 11:03 AM To: [email protected] Cc: Andrew Burton Subject: Re: Stus-List Engine panel cover... Then check out the film; its sometimes called a clear bra for cars and I believe it's available in sheets. andy On Tue, May 26, 2015 at 11:00 AM, David via CnC-List <[email protected]> wrote: Andy, Thanks and that's good, but I fear spraying it on may goop up the warning buzzer and cause it to be somewhat silenced. Thanks Andy. Will let you know. Much replacing of gear and less innovative stuff this year. David F. Risch (401) 419-4650 (cell) ------------------------------------------------------------------------------ Date: Tue, 26 May 2015 10:48:14 -0400 To: [email protected] Subject: Re: Stus-List Engine panel cover... From: [email protected] CC: [email protected] This looks promising. http://3mauto.com/products/paint-defender or they make a clear plastic film for the same purpose. I may try it on my new car. Good luck in the Marion to Bermuda Race! I'll be watching your progress and waiting to talk with you about what worked and what didn't on Corsair. Andy C&C 40 Peregrine On Tue, May 26, 2015 at 10:32 AM, David via CnC-List <[email protected]> wrote: I have tried to engineer a cover for my engine panel that will provide better (any) protection from the elements, cockpit filling etc.. No way. Too many compound curves. Anybody know of a translucent adhesive based plastic sheeting that could adhere to the panel (snugly) and give it some protection while allowing visual access to the instruments? Sort of a tougher version of the sticky saran wrap we use at home. Thanks in advance. David F. Risch 1981 40-2 (401) 419-4650 (cell) _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260 _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260 -------------------------------------------------------------------------------- _______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
