I replaced my muffler several years ago. The exact replacement was not listed in Vernalift's catalog - but they custom built one for me so I did not need to changes hoses etc. Cost no more than the closest stock version.
-- Jonathan Indigo C&C 35III SOUTHPORT CT > On May 31, 2015, at 21:02, Jake Brodersen via CnC-List > <cnc-list@cnc-list.com> wrote: > > Ed, > > I put in a Vernalift muffler a number of years ago. I think it was a 1.5” > inlet and 2” outlet. It’s small, but does the job beautifully. I have a > reducer at the transom to take the 2” hose down to match the 1 ½” outlet in > the transom. My 3GM30F does just fine with it. There are a lot of > configurations to choose from. > > http://www.centekindustries.com/vernaliftfig2.html > > Jake > > Jake Brodersen > “Midnight Mistress” > C&C 35 Mk-III > Hampton VA > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edward > Levert via CnC-List > Sent: Sunday, May 31, 2015 8:50 PM > To: cnc-list@cnc-list.com > Cc: Edward Levert > Subject: Stus-List Lift mufflers > > > In the removal of the mixing elbow on a Yanmar 3gm 30F to clear a complete > blockage, inspection of the lift muffler dictates its replacement. Any brand > recommendations and dealers? Exhaust hose is 1 5/8ths. The Vernalift muffler > for that size hose is specked for 10 hp diesel. > > > > Ed > Briar Patch > C&C 34 # 336 > New Orleans, la > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
