Bowlines don't work so good with wire, but I have followed the same procedure 
otherwise. 
Bought an ascender based "Mast Climber" at a boat show last year, but have not 
tried it out yet. 

Steve Thomas
C&C27 MKIII
Port Stanley, ON 
  ----- Original Message ----- 
  From: Mike Casey via CnC-List 
  To: [email protected] 
  Cc: Mike Casey 
  Sent: Saturday, June 06, 2015 21:39
  Subject: Re: Stus-List C&C30-1 climb to top of mast?


  You use two halyards; you go up on the main; the jib is used as a spare. 
Don't use the clips; tie bowlines.


  On Sat, Jun 6, 2015 at 10:16 PM, Chuck Borge via CnC-List 
<[email protected]> wrote:

    Jay, 
    I'm around 225 and just did it on my C&C34. And years ago was the go-to guy 
on a J30.  Scary that on that crew, I was both youngest and lightest... Yikes. 
    Not a bad ride, just have a good chair, and good guys in the winch. 
    Good luck, 
    Chuck B
    C&C34 Elusive
    Somerset, MA


    Sent from my iPad

    On Jun 6, 2015, at 8:57 PM, Kirkpatrick, Jay via CnC-List 
<[email protected]> wrote:


      ‎I'd like to replace my windex with a new one, but don't want to drop the 
mast to do it.
      On larger boats we send someone up the mast to retrieve halyards etc, but 
has anyone done this on a 30-1?
      I wonder if 200lbs at the top to install a new windex is too much of a 
risk of damage or injury. Has anyone lived to tell the story?
      Cheers,
      Jay




      _______________________________________________

      Email address:
      [email protected]
      To change your list preferences, including unsubscribing -- go to the 
bottom of page at:
      http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



    _______________________________________________

    Email address:
    [email protected]
    To change your list preferences, including unsubscribing -- go to the 
bottom of page at:
    http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com







------------------------------------------------------------------------------


  _______________________________________________

  Email address:
  [email protected]
  To change your list preferences, including unsubscribing -- go to the bottom 
of page at:
  http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

_______________________________________________

Email address:
[email protected]
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to