Hi Josh, Newport Nautical Supply has one on consignment for about $250 last time I was there (a couple of weeks ago). They may ship, not sure.
Chuck B C&C 34 Elusive Somerset, MA Sent from my iPad > On Aug 12, 2015, at 8:51 PM, Josh Muckley via CnC-List > <[email protected]> wrote: > > Ken Heaton comes through again! He says, "look at the owners manual." and > there it is #6 and #12 rod which equals 0.198 and 0.281. Which means I would > be in the market for the smallest standard Loos RT-10 rod tension gauge. > > Anybody know where to get one cheap or have one they are looking to part with? > > Thanks, > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > >> On Aug 12, 2015 7:22 PM, "Josh Muckley via CnC-List" <[email protected]> >> wrote: >> Anybody know the rod size for the standing rigging of a 37+ with the tall >> rig? I tried to measure it but evidently my vernier caliper usage skills >> are poor. I'm looking to buy/borrow a Loos RT-10 but need the rod size to >> make sure i get the correct one. Yes, on the side is a rod gauge but i >> don't want to get committed to a $500 tool just to find out its the wrong >> one and won't fit my rod. >> >> My measurements for the 2 different rod sizes are 5.1mm and 7.25mm or 0.203 >> inches and 0.279. None of the measurements are appropriate which makes it >> impossible to tell if the rod is standard or metric. >> >> Any sources for borrowing a tension gauge would also be appreciated. >> >> Thanks in advance. >> >> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> >> >> _______________________________________________ >> >> Email address: >> [email protected] >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
