If it's a good chute, you may want to avoid harsh chemicals. Sailmakers I know just sprinkle baby powder on the old glue, as Dennis says.
Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Sep 6, 2015, at 17:05, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > Not sure. Probably 3M Adhesive remover. Check with your sail maker. > > I just sprinkled baby powder on the residue on one of mine. Problem solved! > > Dennis C. > >> On Sun, Sep 6, 2015 at 3:43 PM, Joel Aronson via CnC-List >> <cnc-list@cnc-list.com> wrote: >> All, >> >> Just got a nearly new chute off Ebay for next to nothing. When I remove the >> numbers there is residue on the sail. What will safely clean up the glue? >> >> Joel >> 35/3 >> Annapolis >> >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com