Or a bowline. Sent from my iPad
> On Sep 18, 2015, at 4:15 PM, Paul Fountain via CnC-List > <cnc-list@cnc-list.com> wrote: > > You would need a sling or bridle. > > Paul. :) > > >> On Sep 18, 2015, at 3:15 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> The Admiral and I have mastered the art of hoisting the inflatable 9+ foot >> dinghy and putting it on the foredeck for transits. We use a halyard and a >> cabin top winch. It's fairly simple. I've even done it by myself. Unless >> the wind is really honking, it's a simple matter to attach a halyard to the >> dinghy's bridle and hoist it high enough to clear the lifelines. We then >> lower it to the deck and strap it down. >> >> We also use a halyard and cabin top winch to put on or take off the dinghy's >> outboard. It's an early 80's 7 hp so it isn't exactly a lightweight. >> >> Don't see why you couldn't recover a MOB the same way. >> >> Dennis C. >> Touche' 35-1 #83 >> Mandeville, LA >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
