Been doing this since the 1980s with no ill effect. Joe Della Barba Coquina C&C 35 MK I with a rigid vang.
From: CnC-List [mailto:[email protected]] On Behalf Of William Walker via CnC-List Sent: Wednesday, September 30, 2015 7:59 AM To: [email protected] Cc: [email protected] Subject: Re: Stus-List Sailing with main topping lift Dennis, I too have garhauer rigid and it was the first upgrade made to my boat. Wouldn't be without it. Do you see any downside to using the main halyard as topping lift when sails down ? Done this for years without adverse effects that I can see. I removed topping lift. Bill Walker CnC 36 Sent from AOL Mobile Mail ________________________________ On Tuesday, September 29, 2015 Dennis C. via CnC-List <[email protected]<mailto:[email protected]>> wrote: A main topping lift serves two primary purposes: 1) opening the top of the main to create more twist and 2) holding the boom up when the mainsail is not hoisted. In my opinion, the former is more suited to a rigid boom vang or boomkicker. If either are properly installed, they should raise the boom enough to twist off the main. The big advantage of a rigid vang or boomkicker is that it will allow you to detach the topping lift and move it forward to the mast while sailing. Why? To prevent damage to your mainsail. Topping lifts, in particular, wire topping lifts, will abrade the stitching near the leech of your main. In severe cases, you might eject a batten as the stitching in a batten pocket gives out. Rope topping lifts don't abrade nearly as much but they will, over time, cause damage to the stitching. We never sail Touche' with the topping lift attached to the boom. It is always detached from the boom and carried forward to the mast. We have a Garhauer rigid boom vang. On Touche' the topping lift is only used to stabilize the boom when the mainsail is not hoisted. Dennis C. Touche' 35-1 #83 Mandeville, LA _______________________________________________ Email address: [email protected]<mailto:[email protected]> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
