Joel,
I’ve used butyl tape for a deck hatch, baby stay track and pedestal guard deck mount brackets. It did the job and remains pliable forever. The hardest part of rebidding was to remove the old sealant which cracks with age. My understanding is some 3M products adhere to the gelcoat better than the gelcoat adheres to the fiberglass. I worked a sharpened putty knife between the item and the deck so as to cut the sealant. Here’s a great article on using butyl tape: http://forums.sailboatowners.com/index.php?threads/bedding-deck-hardware-with-bed-it-butyl-tape.117172/#post-705340. It is available from http://www.pbase.com/mainecruising/butyl_tape. Good luck, Ron Ron Ricci S/V Patriot C&C 37+ Bristol, RI <mailto:[email protected]> [email protected] From: Joel Aronson [mailto:[email protected]] Sent: Thursday, October 15, 2015 8:14 AM To: [email protected] Subject: Stus-List rebedding hatch All, I'll be replacing the front hatch with a Lewmar hatch. Which sealant should I use? Sikaflex, Lifecaulk, something else? I need to overdrill, epoxy and redrill the new screw holes, correct? Joel 35/3 Annapolis -- Joel 301 541 8551
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
