I have a 33ii with standard deck fitting, AND an adaptor that fits
perfectly and gladdens the hearts of those who have to pump the tank.
Will photograph and measure and post.
Dave
Message: 1
Date: Wed, 21 Oct 2015 12:12:26 +0000
From: Paul Fountain <p...@seasource.ca>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Subject: Re: Stus-List Pump-out fitting
Message-ID:
<BN3PR0501MB15216174A0D21F194DCED1A5B4380@BN3PR0501MB1521.
namprd05.prod.outlook.com>
Content-Type: text/plain; charset="us-ascii"
Brad,
We ended up replacing the all the deck fittings on Perception our 33-II
with stainless. If I recall the original were from New Zealand, and we
could not find a waste fitting to fit. This was done as part of replacing
the hoses too.
Paul Fountain
Perception-II
1985 C&C 33-II
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bradley
Lumgair via CnC-List
Sent: Tuesday, October 20, 2015 10:52 PM
To: cnc-list@cnc-list.com
Cc: Bradley Lumgair <lumg...@hotmail.com>
Subject: Stus-List Pump-out fitting
Thanks for the replies, our marina uses the threaded fittings regularly,
I'm going to have to order one so I don't get caught with a full tank. got
all winter to shop, may check out the Toronto Boat circus in January.
Brad
1985 C&C 33 MkII "Pulse"
Sent, miraculously through cyberspace,
from my iPad!
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
