NEB is $44/ft storage, washing plus $4/ft blocking; I will be there this winter. There is a list member who should be pretty knowledgeable about NEB for input on treatment of clients. They have been very helpful to me so far.
Tim On Thu, Oct 29, 2015 at 4:45 PM, Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > thats not much more than what FL Tripp wants. > > Do they store mast up? > > Maybe you're going to see me there... it is actually no further timewise > from my house and probably a few less miles > > Danny > > ---------- Original Message ---------- > From: Andrew Burton via CnC-List <cnc-list@cnc-list.com> > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > Cc: Andrew Burton <a.burton.sai...@gmail.com> > Subject: Re: Stus-List Boom Furling complications > Date: Thu, 29 Oct 2015 16:03:40 -0400 > > Hinckley is 433/ft for dry storage plus 11/ft for haul and wash. NEB is > about the same. > I'm going to NEB rather than some of the other options around the bay > because they don't do anything in a slipshod manner. I know there are some > places that do. > Caveat emptor! > > Andy > C&C 40 > Peregrine > > On Thu, Oct 29, 2015 at 3:56 PM, Danny Haughey via CnC-List < > cnc-list@cnc-list.com> wrote: > >> So, I'm looking around, does anyone know anything about the Borden Light >> Marina. They have some good reviews on Active captain an another couple of >> sites but, anyone could write those. >> >> Their rates are really cheap at $18/ft for wet storage and $33/ft for on >> land storage. Thats a 3-4 hour trip for me by boat but, closer to drive >> from the house. >> >> Danny >> Westport Point, MA >> >> >> ---------- Original Message ---------- >> From: Joel Aronson via CnC-List <cnc-list@cnc-list.com> >> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> >> Cc: Joel Aronson <joel.aron...@gmail.com> >> Subject: Re: Stus-List Boom Furling complications >> Date: Thu, 29 Oct 2015 15:27:59 -0400 >> >> Danny, >> >> I assume you have projects to do over the winter. Close to home helps >> get things done. >> Wet store where you are and arrange for a haul-out and to have the bottom >> work to be done in the early spring. You'll be blocking the lift, so they >> will have to turn it around quickly. >> >> Joel >> >> On Thu, Oct 29, 2015 at 3:21 PM, Tim Goodyear via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Danny, >>> >>> New England Boatworks in Portsmouth, RI allows storage with the mast up >>> (and there's someone on the list that knows a lot about that location). >>> That's pretty close to Westport Point. >>> >>> Tim >>> >>> On Thu, Oct 29, 2015 at 3:06 PM, Danny Haughey via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> Hi All, >>>> >>>> So, it seems the yard said they cannot remove the mast because of the >>>> sail track that rides up the mast track for the furling system. >>>> >>>> I basically have two options where they are concerned. Find another >>>> yard for storage or, wet store the boat in a slip. >>>> >>>> I don't think I would mind the wet storage option if she wasn't in such >>>> a need for a bottom job. >>>> >>>> What do you guys think? >>>> >>>> The reason they cannot remove the mast is because they use a sling and >>>> the sling would damage the track... >>>> >>>> Maybe someone can recommend a place nearby where I can store her on the >>>> hard. i know not every yard requires the removal of the mast. >>>> >>>> Danny >>>> Westport Point, MA >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> > > > > -- > Andrew Burton > 61 W Narragansett Ave > Newport, RI > USA 02840 > http://sites.google.com/site/andrewburtonyachtservices/ > phone +401 965 5260 > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
