Ahmet
            I have a 1976 38' MKII and the aft keelbolt looked like your 
picture #3 only worse the washer was actually curved as well as not sitting 
flat. I eventually replaced the washer with a machined backing plate made of 
stainless. I am sure they came from the factory that way.  

                                                                                
     Gary Kolc  "Liberty"
---- Rick Taillieu via CnC-List <cnc-list@cnc-list.com> wrote: 
> Ahmet,
> 
>  
> 
> I uploaded some pictures of my bilge here, 
> http://postimg.org/gallery/3eg9rsocy/
> 
> Let me know if the link works for you.
> 
>  
> 
> Rick Taillieu
> 
> Nemesis
> 
> '75 C&C 25  #371
> 
> Shearwater Yacht Club
> 
> Halifax, NS.
> 
>  
> 
>  
> 
>  
> 
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ahmet via 
> CnC-List
> Sent: November-07-15 17:01
> To: cnc-list@cnc-list.com
> Cc: Ahmet
> Subject: Re: Stus-List Keel attachment issues on a C&C 25
> 
>  
> 
> Thank you. I would be interested to see if you have a sump area, i.e a 3 - 4 
> inch dropoff in the bilge  which then slopes upwards towards the bow.  I am 
> not sure how come that keel-bolt got exposed. 
> 
>  
> 
> I did a search for Tabasco on the list archives, and did not find any 
> references. I bought it from an older gentlemen in Marblehead, MA.
> 
>  
> 
> He had been sailing her for a while but health issues have been preventing 
> him. The boat was neglected to some point. All the wiring was laid up but not 
> connected. The stanchions were leaking. 
> 
>  
> 
> Others have told me that too. Maybe it is a familiar sounding name. 
> 
>  
> 
> First thing I did is replace the stanchions with the aluminum toerail mounted 
> ones and used wooden dowels soaked with 4200 and marinetex to get rid of  all 
> holes from he old stanctions. So now the cabin is pretty dry. The hatch is 
> leaking a bit but I think that is just the rubber gasket.
> 
>  
> 
> He lost the rigging last year so she has brand-new rigging, double, brand new 
> heavy lifelines and a 4-stroke 2010 Nissan 9.9 hp engine. 
> 
>  
> 
> Thank You
> 
>  
> 
> Ahmet
> 
> Winthrop Yacht Club / Constitution Marina, Boston, MA
> 
> 1990 Irwin 43 CC "Waterdancer"
> 
> 1973 C&C 25 "Tabasco"
> 


_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to