Take the hinge off and have a weld shop build up the missing aluminum, then cut/grind/sand to original shape, and drill new holes.
Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Wolfe via CnC-List Sent: Tuesday, January 19, 2016 2:09 PM To: cnc-list@cnc-list.com Cc: Alex Wolfe Subject: Stus-List Looking for Hatch Hinge for A&H C&C 24 '77 model Hi amigos, Greeting from sunny Florida. I won't say any more about it, I promise. I am repairing my leaky hatch despite recommendations to replace it with a new unit. One of the problems is that one of the hinges is broken off at the tip, missing a portion up to the first of two screw holes. Does anyone know where I can find one of these babies? I was going to have it fabricated but the guy here in Miami wants 250 for it. It is a rather complex design. The hatch is no longer made, as you know. Replacing it with an entirely new unit, besides being a design faux pas, has let me to the problem of the cut out size not being quite right (mine is a 1/4" smaller in most cases) and the natch frames not being flush to the deck. The ones I have found have a lip, which the original does not have. Any suggestions would be helpful. Thanks. Alex Wolfe Shaka, C&C 24 Coconut Grove Sailing Club Alex Wolfe (917) 863-9918 www.alexwolfe.tv <http://www.alexwolfe.tv/>
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
