On our C&C 27 I ended up with a large fender washer between the tiller and the rudder post it was a tight fit, but eliminated a very annoying slop due to a very tiny gap that tightening the bolt could not remove ….
Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:[email protected]] On Behalf Of Ryan Doyle via CnC-List Sent: Thursday, January 21, 2016 2:34 PM To: [email protected] Cc: Ryan Doyle <[email protected]> Subject: Stus-List 1976 30mki - Tightening the tiller Hello everyone, Sorry for the duplicate post if the last one went through! Just curious if anyone has experience tightening a loose tiller on a 30 mki or similar boat. My tiller steers the boat just fine, but there is some some noticeable play in it from side to side. Not sure if this is helpful, but there is a photo of my tiller where it meets the cockpit sole at the below link. Thanks in advance for any advice. https://drive.google.com/file/d/0B8g8d5sXYVWGYWxVcnRCOHkteFU/view?usp=docslist_api Ryan
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
