And, in addition, tie an inside bowline so the tail is inside of the loop. If I happen to make the tail too long, I then put it into the clew ring so it is not loose.
Rick Brass Washington, NC From: CnC-List [mailto:[email protected]] On Behalf Of Jerome Tauber via CnC-List Sent: Wednesday, February 17, 2016 10:38 PM To: [email protected] Cc: Jerome Tauber <[email protected]> Subject: Re: Stus-List Soft shackle The bowlines should be tied in opposite directions so the flat side is facing in against the shroud and doesn't get hung. In other words the port side bowline should have the flat side facing the starboard side and vice versa. This reduces the chance of hanging up on a shroud. Jerry. C&C 27 V J&J. Sent from my iPhone
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
