Brian;
Take a look back in the list archive for this thread. I could swear that someone posted a source and a part number for the 1 ¼ x 1 5/8 cutless bearing you need three or four days ago. Rick Brass Washington, NC From: CnC-List [mailto:[email protected]] On Behalf Of Brian Fry via CnC-List Sent: Saturday, February 27, 2016 6:45 PM To: [email protected] Cc: Brian Fry <[email protected]> Subject: Stus-List Macgyver 2 So this is what I ended up with: MacGyver part 2 http://imgur.com/LD5A3De It is really slow going. I managed to get about 1/2 inch out to take a measurement. It is definitely 1 5/8" 1 5/8 diameter outside http://imgur.com/970E1vR I will probably cut it out now. Thinking I will have to sleeve a 1 1/4 × 1 1/2 with a 1 1/2 × 1 5/8 Anyone know a machine shop in the Chesapeake area?
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
