Bill, Martin, thank you for the help. Its just to seal the balsa in a penetration, above the water line. It'll probably be fine. I'll have to check it out tonight. Danny
Please note: message attached From: Martin DeYoung via CnC-List <cnc-list@cnc-list.com> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> Cc: Martin DeYoung <mdeyo...@deyoungmfg.com> Subject: Re: Stus-List West System Epoxy & resin Date: Fri, 8 Apr 2016 18:47:25 +0000
Danny, Two suggestions; check on the West systems web site and, if the bond is to critical (e.g. very important vs. cosmetic) run a test batch (2 pumps of each part) mix well and let cure. If it sets up and looks normal I would use it. Martin DeYoung Calypso 1971 C&C 43 Seattle [Description: Description: cid:D1BF9853-22F7-47FB-86F2-4115CE0BAF2F] From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Friday, April 08, 2016 11:27 AM To: cnc-list@cnc-list.com Cc: Danny Haughey Subject: Stus-List West System Epoxy & resin I left my west system epoxy out in the shed all winter. would the sub freezing temps have had any ill effect? Should I just buy more? Danny
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!