Hi guys, I removed the salon table as I found it doesn't stow very well out of the way. My intention is to figure out a way to add some kind of hinged fitting to the mast and add a drop down leg for support. This would allow me to stow it with the leaves straddling the mast and leave the space more open when the table is not in use.
However, the existing stand/pedestal required a 4 or 5 inch hole thru the sole piece that it was mounted too. So, I need a small piece of 3/4 teak and holly plywood, about 9.5x28 I have to do some larger sole repairs but, not until next winter and I don't want to buy the 4x8 sheet yet because i don't want to store it. I do have some 3/4 marine plywood i could use temporarily but, I'd rather just do it with the teak and holly if I can get hold of a small piece somewhere. I'm certainly willing to pay for it or replace it when I buy the sheet for my sole work next winter. would anyone have any laying around or know of a resource where I might be able to get small piece for this repair? Danny T40 Rum Runner IV Mattapoisett, MA _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
