Hi Fred, Try: http://www.zephyrwerks.com/ They have a great reputation!
Lee On Apr 18, 2016, at 1:27 PM, Frederick G Street via CnC-List <[email protected]> wrote: > I just finished rewiring my mast over the weekend, upgrading with new LED nav > lights from Marinebeam, along with new low-loss VHF and cell-repeater antenna > cabling, and a Windex light and masthead wind transducer cable as well. > While I was working at the masthead, I took a minute to inspect the sheaves. > They’re the original wire-rope aluminum sheaves (two jib halyards and main > halyard); the measurements appear to be as follows: > > Jib sheaves: 4-1/2” diameter x 11/16” wide, with a bushing for a 7/16” shaft > Main sheave: 3-1/2” diameter x 9/16” wide (with what looks like a Delrin > spacer on each side), with a bushing for a 7/16” shaft > > Have any of you LF38 owners replaced your sheaves? Do these measurements > look correct? Who did you use as a supplier? > > I’ve still got a few weeks before launch, and I’d like to get new sheaves > ordered up so I can replace them before the mast goes back up. Any help > getting the parts right the first time would be appreciated! > > — Fred > > > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
