HI all. Josh Muckley and I have been working on my Yanmar 3GM30F together via email. This list is without a doubt the best source of sailboat information I have encountered. With Josh's help for diesel issues, Fred for electronics and all the other experience it is a treasure for owners. I don't think I can express enough how great this is.
We launched Persistence April 4 and our 3GM30F ran fine. Ran fine April 8 as well and then on April 9 when scheduled to step mast the motor would not start. Appeared starved of fuel. Over the past 10 days we have bled the low pressure lines, bypassed the mechanical lift fuel pump with 12v pump, primed and bled everything many times, check at injectors and eventually deducted no fuel coming from injector pump but plenty of air free fuel going to it. Eventually removed the injector pump and have had it serviced. With the pump out we have noticed the governor lever is not moving freely. This appears to be most likely caused by the governor sleeve being too far aft With all the experience in this list has anyone with a yanmar 2gm or 3gm of any sort had problems diagnosed with the governor? Initial inspection thru injector pump opening looks like the governor weights may be slightly bent out of position. Timing cover must come off to inspect further Just hoping for pearls of wisdom from our great list Mike Persistence 1987 Frers 33 #16 Dead in the Water In Halifax, NS
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
