Check with marine life experts in your area to see if the barnacles prefer arugula or Romaine. The occasional cucumber slice might also appeal to them.
Dennis C. On Wed, Jun 1, 2016 at 12:41 PM, Chuck Gilchrest via CnC-List < cnc-list@cnc-list.com> wrote: > So between the olive oil and vinegar, I should basically just pour salad > dressing down the pot, pump a few times and hope it works.. > Any need for other seasoning or a sprig of parsley? > Chuck Gilchrest > Half Magic > 1983 LF 35 > Padanaram,MA > > Sent from my iPhone > > On Jun 1, 2016, at 12:41 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > We keep a small bottle of olive oil on Touche' to cook with. Olive oil > can go rancid. Every spring we buy a new bottle and the old bottle goes > for lubing the head. > > Dennis C. > > On Wed, Jun 1, 2016 at 11:21 AM, IRVIN via CnC-List <cnc-list@cnc-list.com > > wrote: > >> Once you get it working a periodic flush with vegetable oil will keep it >> lubed. >> >> Sent from my iPhone >> >> On Jun 1, 2016, at 6:51 AM, Tim Goodyear via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> If you're getting a little backflow from the joker valve, you may want to >> try running some household (white) vinegar through the system and leaving >> it to soak overnight. Salt deposits build up on the valves and vinegar >> helps dissolve it. It is a cheap and very much hands-off first option. >> >> Tim >> >> >> On May 31, 2016, at 9:10 PM, Chuck Gilchrest via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> I just bought the rebuild kit for $72 at Jamestown Distributors (USD) but >> it seems the Thetford Headmate pump assembly is currently back ordered from >> those that are listing it on their websites. >> >> I get a slight amount of back flow if the head is pumped empty which I >> suspect is the joker valve either worn or not seating properly. Also, the >> handle doesn’t want to stay in the down position in either the empty or >> flush position, which makes me believe there is back pressure even when the >> intake side is shut. >> >> Chuck Gilchrest >> >> S/V Half Magic >> >> 1983 LF 35 >> >> Padanaram, MA >> >> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com >> <cnc-list-boun...@cnc-list.com>] *On Behalf Of *Marek Dziedzic via >> CnC-List >> *Sent:* Tuesday, May 31, 2016 6:50 PM >> *To:* Dennis C. via CnC-List <cnc-list@cnc-list.com> >> *Cc:* Marek Dziedzic <dziedzi...@hotmail.com> >> *Subject:* Re: Stus-List Toilet Repair Wilcox Crittenden >> >> >> >> And it is almost cheaper, as well. I had just replaced a pump in my head >> and I paid $95 for the pump, and the repair kit was $85 (both CAD). It was >> a Jabsco, so not the same, but in the process I got a locking handle as a >> bonus. >> >> >> >> I made a mistake to remove the waste hose off the old pump. What a pain. >> >> >> >> Marek >> >> >> >> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for >> Windows 10 >> >> >> >> *From: *Dennis C. via CnC-List <cnc-list@cnc-list.com> >> *Sent: *May 31, 2016 16:35 >> *To: *CnClist <cnc-list@cnc-list.com> >> *Cc: *Dennis C. <capt...@gmail.com> >> *Subject: *Re: Stus-List Toilet Repair Wilcox Crittenden >> >> >> >> You may want to consider a new pump assembly. If it's a WC Head Mate >> 1460-C then the pump assembly should be Part 015461. >> >> There are a couple of benefits of replacing the entire pump assembly. >> Your old pump cylinder may be scored or worn. It's usually quicker and >> easier than installing a rebuild kit. >> >> Dennis C. >> >> >> >> On Tue, May 31, 2016 at 1:49 PM, Eugene Fodor via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> Trying to identify the correct toilet repair kit for my marine head on my >> C&C 29 Mark II 1984/85. It is clearly a Wilcox Crittenden. The pump is >> leaking fresh water out of the top when pumping and when heeled over there >> is significant backflow from the tank. :-( I'm pretty sure the joker valve >> is shot. Here's some pictures of the pump and head: >> >> >> >> https://goo.gl/photos/VrEo64B65gto2wU19 >> >> >> >> The following kit looks like it's the right one. >> >> >> >> >> http://www.westmarine.com/buy/wilcox-crittenden--headmate-maintenance-kit--135301 >> >> >> >> Has anyone else had experience repairing these? Does that look like the >> right kit? >> >> >> >> Thanks, >> >> >> >> Gene Fodor >> >> C&C 29 Mark II >> >> Hawk >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> like what we do, please help us pay for our costs by donating. All >> Contributions are greatly appreciated! >> >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> like what we do, please help us pay for our costs by donating. All >> Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> like what we do, please help us pay for our costs by donating. All >> Contributions are greatly appreciated! >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> like what we do, please help us pay for our costs by donating. All >> Contributions are greatly appreciated! >> >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
