Hi Bruno, Which size did you use? They have a 0, 1 and 2, but it's not clear which would be the best fit (guessing the 1). I'm assuming you got the aluminum riser bar from some place like Grainger or Home Depot? I do have a drill press so that shouldn't be an issue.
Thanks, Gene C&C 29-II Hawk On Thu, Jun 2, 2016 at 3:58 PM, Bruno Lachance <[email protected]> wrote: > hi Eugene, > > > On my previous boat, a 29 mkII, i replaced the mainsheet traveller with > this kit from Lewmar : http://www.lewmar.com/node/14612?v=26085 > It works very well, it’s powerful so you will love to play with it! i bet > you were not into those pin stoppers...and the price is good compared to a > similar Harken setup. > > The installation is simple, you cut the track to lenght, and the bolts > slide into the new tracks so you can use the existing holes. Fairly easy > DIY project. I did have to had a ¼ inch thick, alumimun flat bar to make it > clear the recessed. > > Writing this i remember now the worst was to drill that flat bar to fit > existing holes… yeah without a pressdrill it took some patience to punch > and drill... > > good luck! > > Bruno Lachance > > Bécassine, 33 mkII > > New-richmond, Qc > > > > > ------------------------------ > Date: Thu, 2 Jun 2016 15:16:38 -0500 > To: [email protected] > Subject: Stus-List Matching Traveller Track Dimensions 29 Mark II > From: [email protected] > CC: [email protected] > > Thanks folks for all the advice on my marine head. I purchased the Wilcox > Crittenden Headmate kit from wet marine so wish me luck. Plan to rebuild > the pump this week-end. > > Next thing I'd like to update is to put in is to replace the traveller > stops with some actual rigging. Anyone have any experience using the > existing traveller bar on their C&C 29 mark II with running rigging from > Harken or Ronstan? I'm hoping the track is compatible so I don't have to > rebed it. > > Thanks, > > Gene > > _______________________________________________ This list is supported by > the generous donations of our members. If you like what we do, please help > us pay for our costs by donating. All Contributions are greatly appreciated! >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
