Bill,  I replaced the old fluorescent fixture over the settee and table with a 
Marinebeam LED, single bulb replacement.  Economy 15" T5 LED Fluorescent-Style 
Fixture 
<https://store.marinebeam.com/economy-15-t5-led-fluorescent-style-fixture/>    
It has current protection and a choice of wavelengths.  As you say, there is no 
space within the fixture for wire termination, made doubly difficult on the 35 
MkII because the wires for the port cabin lights continue forward past the 
light for lighting the rest of the port side.  So 2 + and 2 - wires to deal 
with.  I ended up cutting out a few inches of the liner where the old light was 
and made my connections inside that space, between the cabin roof and the 
liner.  That opening is narrow so the new light completely covers the hole, and 
then I just filled the old screw holes with the putty recommended a few months 
ago on this list.  The light is great and draws about 1/4 the power of the old 
one.  Works fine and is fairly cheap.

Eric Frank
Cat's Paw
C&C 35 Mk II
Mattapoisett, MA

> From: "Bill Coleman" <[email protected] <mailto:[email protected]>>
> To: <[email protected] <mailto:[email protected]>>
> Subject: Stus-List Salon Lighting
> 
> Most of the older C&C's had double rectangular  fluorescent lights in the
> main cabin, which are nowadays woefully inadequate. I eventually gave up
> finding a replacement that would cover all the holes and I purchased 4 Aqua
> Signal  lights,
> http://www.defender.com/product3.jsp?path=-1|65136|2312540|2312542 
> <http://www.defender.com/product3.jsp?path=-1|65136|2312540|2312542>
> <http://www.defender.com/product3.jsp?path=-1|65136|2312540|2312542&id=16074 
> <http://www.defender.com/product3.jsp?path=-1|65136|2312540|2312542&id=16074>
> 97> &id=1607497
> But unfortunately there is no space behind the light for wire termination.
> What have others used for replacement  overhead lighting in the cabin?
> Bill Coleman
> 

_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to