Hello Paul,
I had cut the extension cable for my RAM3 remote mic and re-spliced it without
any issue. I did not used butt crimp, but soldered and shrink wrap each
individual wire. I tried to keep enough shield braid to cover the splicing
section. Of course, I cut the VHF end of the cable so splice would be in a more
environmental control space.
Pierre TremblayAvalanche #54988C&C38-3 WK, hull #76
Le mardi 28 juin 2016 1h03, paul.hood via CnC-List <[email protected]>
a écrit :
Im trying to send wiring (Transducer and vhf/power) to the Chart plotter and
alao to a ram mike at the pedestal Wire ends are factory and told by Standard
Horizon not to cut. They are 3/4" and 7/8" diameter each Pedestal Guard rail
is barely 1" O.D. I'm looking for recommendations. Do I1) make huge elongated
holes in the pedestal guard and run wiring through guard into cockpit floor
(7/8" head won't even fit the I.D. of guard)2) come up through pedestal instead
and drill a hole in the backside of pedestal. 3) cut wire ends off and
reconnect after bring them through a smaller hole on either the guard or
pedestal
Paul Hood81 C&C34
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
