I find EasyPoxy to be a lot softer than Brightsides, and definitely takes longer to cure hard. I have never tried the Rustoleum paint, but the samples I saw comparing the results were very much in favour of the Interlux.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 23 August 2016 at 09:33, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Wow – my 35 needs paint. Let me know how this goes! > > BTW- I have heard nothing but excellent reviews of Rustoleum topsides > paint that is way cheap compared to marine brands, both for results and > ease of use. I used EZPoxy way back in the day on a wooden Penguin I had > sans primer. I ended up peeling off L Primer is 90% of the battle. It is > designed to connect old mystery paint to new paint J > > Joe > > Coquina > > C&C 35 MK I > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Hoyt, > Mike via CnC-List > *Sent:* Tuesday, August 23, 2016 12:21 > *To:* cnc-list@cnc-list.com > *Cc:* Hoyt, Mike > *Subject:* Re: Stus-List Anyone use Pettit Easypoxy (EZ-Poxy one part) to > paint topsides? > > > > Brandon > > > > If you do not know what paint was used previously it is strongly > recommended that you prime. You do not know what if any reaction may take > place between the old and new paint > > > > Mike > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com>] *On Behalf Of *Brandon Gaspard via > CnC-List > *Sent:* Tuesday, August 23, 2016 1:09 PM > *To:* cnc-list@cnc-list.com > *Cc:* Brandon Gaspard > *Subject:* Stus-List Anyone use Pettit Easypoxy (EZ-Poxy one part) to > paint topsides? > > > > I'm painting my hull with a one part topside paint and I decided on EZ > Poxy by Pettit. I've heard better things about Pettit's one part than > Interlux's Brightside. Awlgrip is much more expensive and supposedly much > more difficult to work with. I'm painting a C&C 35 Mk1 in the sweltering > Louisiana summer heat. Any tips on using EZ Poxy? > > The plan is a good pressure washing, followed by Bio Blue Hull, orbital > sand with ~200 grit, acetone clean, paint (brush and tip), sand with 300 > grit, wipe down, then apply a second coat. Boot strip and details will be > done with Pettit Boot Top. > > I don't plan on priming because Tango's original gel coat has already been > painted over. The paint job is holding up and looks to be in decent enough > shape to paint over. > > Any tips or suggestions? > > Brandon > C&C 35 Mk1 > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
