Check the bolts holding the top post and bearing. Joel On Monday, September 26, 2016, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote:
> When my 35 MK I was doing that it was because the upper bearing had too > much slop. I made a new bearing and fixed it. > Joe > Coquina > C&C 35 MK I > > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com <javascript:;>] On > Behalf Of Kris O'Brien via CnC-List > Sent: Sunday, September 25, 2016 21:08 > To: cnc-list@cnc-list.com <javascript:;> > Cc: Kris O'Brien > Subject: Stus-List 35-3 emergency helm flex > > Greetings, > I recently purchased my first C&C, a 1984 35-3 here in Southern California. > As I was motoring from marina del Rey to her new home port I noticed the > emergency tiller stub flexing slightly as we took swell to the beam. > I am wondering if this is normal and if not the potential causes and fixes. > If anyone has experienced this please let me know. > Thank you. > > Kris O'Brien > > California Substrates > > > 818-300-9898 > skype: coldkris > > Sent from my iPhone > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
