Danny, I used about eighteen 12" x 12" x 1-1/8" square tiles I bought from Sailor Solutions. See: http://www.sailorssolutions.com/index.asp?page=ProductDetails&Item=SPM01. The engine access panels seat against the engine compartment frame using 3/8"x2" or 3/4"x2" closed cell vinyl nitrile tape.
The tiles were easy to work with and after 5 years, I'm still happy with the results. Regards, Ron S/V Patriot C&C 37+ Bristol, RI -----Original Message----- From: CnC-List [mailto:[email protected]] On Behalf Of Danny Haughey via CnC-List Sent: Monday, October 3, 2016 1:41 PM To: [email protected] Cc: Danny Haughey Subject: Stus-List engine compartment insulation Hello all, I was wondering if anyone had any advice on engine compartment insulation. The foam backed reflective stuff on my T40 was basically disintegrating. I cleaned most of it out with a scraper and a shop vac. Have any of you dealt with this? What should i put in its place? seems it will be a more tedious job than difficult. -- Danny T40 Rum Runner IV Mattapoisett, MA _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
