I thought about backing the ring but that might make a haul out an immediate necessity! Thanks!
Cheers, Aaron R. Admiral Maggie, 1979 C&C 30 MK1 #540 Annapolis, MD ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Jim Watts via CnC-List <cnc-list@cnc-list.com> Sent: Monday, October 10, 2016 8:16 PM To: 1 CnC List Cc: Jim Watts Subject: Re: Stus-List Seeping Depth Sounder If you can back the ring off enough to insert it, butyl tape or a thick ring of Lanocote would probably make it leak-free for a while. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 10 October 2016 at 16:44, Dennis C. via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Pray the thru hull isn't cracked? Dennis C. On Mon, Oct 10, 2016 at 5:21 PM, Aaron Rouhi via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I just noticed my depth sounder is seeping small amount of water from the bottom between plywood backing plate and the ring. Anything I can do short of a haul out to fix it until next Spring? Silkaflex? 5200? Really not looking forward to haul out right now... Cheers, Aaron R. Admiral Maggie, 1979 C&C 30 MK1 #540 Annapolis, MD _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!