Howard, You may want to review why there is pressure in the crank case pushing oil out. It may not be an issue, but if it has changed, it could be that you have piston ring issues allowing exhaust gas blow-by.
Regards, Tim (ex35-3, but with a 3GM30F) > On Nov 2, 2016, at 5:09 PM, Howard and Skippy via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hello All, > Now that the boat (35-3) is on the hard, I was able to clean the engine and > try to locate the source of my oil leak(s). It appears that the culprit is > the dipstick! The rubber seal no longer is able to stay in place, rises up > and allows oil out of the crankcase when under power. The local parts shop > says the oil dip stick is out of stock and not available. Does anyone have a > lead on where to obtain a dipstick for a 3GMD? Thanks. > Howard Paul, Skipper of Knot Again > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
