save the removed insulator, split it and use it over the joint.  You want as 
'smooth' joint as possible.  The cable is designed with 'that' insulator, reuse 
it.

Leslie.
spent many years communicating with spacecraft millions of miles away, using 
BIG antennas...

--------------------------------------------
On Fri, 11/18/16, Dennis C. via CnC-List <[email protected]> wrote:

 Subject: Stus-List Splicing RG58 coax
 To: "CnClist" <[email protected]>
 Cc: "Dennis C." <[email protected]>
 Date: Friday, November 18, 2016, 5:02 PM
 
 My old Garmin text
 only GPS quit acquiring satellites.  I tried a spare 128
 with the same result.  Aha, bad antenna.  I bought a cheap
 Chinese knock off replacement.  
 
 When I went to pull the old antenna out, I
 discovered the cable somehow got cut by the steering
 system.  (I think it was a leprechaun or boat gremlin but
 not sure.)
 
 So, the old antenna is probably still good and I'd
 like to fix it as a spare.  With a new antenna costing only
 $30, it doesn't pay to invest in pricey splice
 connectors, etc.  My buddies on the bayou and some internet
 research say the RG58 AU cable can be spliced by soldering.
 
 Seems simple enough.
 Peel back the outer covers and shieldsStrip
 the insulator to expose the center conductorsSolder
 the center conductors togetherBuild up the
 insulator with Teflon tape, heat shrink tubing,
 etcPull one shield downPull the other
 shield over it and solderFinish with heat
 shrinkLike this only neater:  https://www.youtube.com/watch?v=4vYcYz9pbTE
 
 This is more of a curiosity project than a necessity.  Just
 chunking the old one in the trash is also OK.
 
 Any other ideas?  I see cheap connectors on mouser.com etc but don't
 see a butt splice thingie.  I saw a video using two female
 connectors and a barrel connector.
 
 Dennis C.
 Touche' 35-1 #83
 Mandeville, LA
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 
 This list is supported by the generous donations of our
 members. If you wish to make a contribution to offset our
 costs, please go to:  https://www.paypal.me/stumurray
 
 All Contributions are greatly appreciated!
 

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to