a few years ago the yard hauled my Viking 33 and had the strap on the prop shaft. They broke the strut and bent the brand new shaft.

we had to pin the strut back together and have a new one molded at a local foundry. that was $550. the yard took care of all the repairs due to the haul out accident.

the shaft I had bought and replaced the year prior was about $500. I rebuilt the stuffing box, new hose, high end clamps, packing, and replaced the cutlass bearing at the same time as the shaft replacement. I did all the work myself and probably spent around $750ish which included the machine shop truing the prop on the shaft.

It's a bear of a job but really only because the access was really tight and some of the wrenching can be very hard. Nothing really all that complex. Mostly just parts replacing, providing that tube is fine. Given the fact that you will be removing the strut, removing the cutlass should be simple bench work (hopefully that isn't bent). Aligning everything back up again is where you need to be careful.

Danny


On 11/22/2016 8:24 AM, Hoyt, Mike via CnC-List wrote:

We did this on Persistence. Other end of line was attached to a stanchion. Strut was bent and minor damage to stern tube.

Suggest you remove fuel tank as suggested earlier and inspect stern tube carefully as well as shaft for any bends. Have some one check the alignment of the shaft with the engine as well once the strut is rebidded. Might also be a good time to change out cutlass bearing if it has any wear

This was a $6000 job for us. We had a worn cutlass bearing which had a wear spot on shaft so those were both replaced (only due to the wear) and accounted for $2000 of this repair

Mike

Persistence

Halifax, NS

*From:*CnC-List [mailto:[email protected]] *On Behalf Of *Tom Alessi via CnC-List
*Sent:* Monday, November 21, 2016 4:57 PM
*To:* [email protected]
*Cc:* Tom Alessi
*Subject:* Stus-List Fw: Strut

Hey,

Recently wrapped a line around my prop/shaft and found some damage and a loose prop strut when the boat was hauled.

Has anyone done this repair and have any advice.

Thx

Tom Alessi
C&C 36

Rockaway Beach, NY



_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to